GreCon pipe fire extinguishing

Leipfinger-Bader secures production with new fire protection solution

The brick manufacturer Leipfinger-Bader has invested in a fire protection system from GreCon. The system used for extinguishing pipe fires monitors the flue gas ducts with spark detectors from GreCon and triggers the extinguishing process if necessary.

An invisible danger

Bricks are produced at the highly automated Puttenhausen site in a 7-day week in two-shift operation. A central component of the production process is the firing of the green bricks at temperatures higher than 900 °C in a 90-m-long tunnel kiln.

In the past, brickworks often used heavy oil as fuel, and this used to be the case in Putthausen, too. Owing to high storage costs, expensive preheating of the oil to 80 °C, strongly fluctuating prices and poor supply reliability, many brickworks have switched to gas. One difference between the two energy sources is the deposits. In contrast to heavy oil, which tends to soot, gas causes deposits during the combustion process. This bitumen-like substance settles in the extraction system. High process temperatures or special conditions in the firing system can ignite the material and lead to a fire in the extraction system.

Pipe fire extinguishing – on-the-spot extinguishing during ongoing production

In addition to the difficult extinguishing conditions from outside, the fire loads are often underestimated. Deposits of carbon, tar and polystyrene have a similar calorific value to petrol. With a 30-m-long pipeline in DN1000 and a layer thickness of, for example, 5 mm, this results in large stored energy quantities.

When these deposits are ignited, pockets of fire are formed. As the fire progresses, the deposits are liquefied and the entire pipeline begins to burn.

Fagus-GreCon has taken a preventive approach, an individually coordinated concept based on a spark extinguishing system. Sparks and fire pockets are detected in the pipeline. With an extinguishing nozzle at the beginning of the extraction line, a pipe fire can be easily and purposefully fought.

Leipfinger Bader focuses on safety

In order to avoid such a pipe fire, the flue gas ducts at Leipfinger Bader have been monitored with spark detectors from GreCon since the beginning of 2019. Fibre optics allow monitoring even at high process temperatures. If ignition sources are detected, extinguishing is initiated, and water is finely atomized along the entire length of the pipe.

„At three sparks, the GreCon system sounds the alarm – at six sparks, extinguishing is initiated,“ says Thomas Brunner, Deputy Technical Operations Manager at Leipfinger-Bader, describing the different alarm levels. These individually adjustable thresholds enable a protection concept that is optimally adapted to the system. All extinguishing systems can also be controlled manually via panels with manual switches.

High process temperatures in conjunction with deposits result in a dangerous combination. Leipfinger-Bader has increased safety in production by installing the fire protection system and is convinced of the effectiveness of this solution.

In order to achieve reliable protection against fires across all its plants, the company has already placed the next order for the installation of a pipe fire extinguishing system at its Vatersdorf facility.

Fagus-GreCon Greten GmbH & Co. KG
www.fagus-grecon.com/de

x

Related articles:

Issue 2/2020 Strategic expansion

Leipfinger-Bader takes over Tonality GmbH

Ziegelwerke Leipfinger-Bader in Vatersdorf has acquired 100?% of the shares in the façade tile manufacturer Tonality in Weroth, which until the end of 2017 still operated on the market as Creaton‘s...

more
Issue 09/2013

Leipfinger-Bader combined heat recovery with exhaust air purification

Investing heavily in energy and environmental engineering, Leipfinger-Bader, the medium-sized clay brick manufacturer based in Vatersdorf, Germany, is taking a new approach to heat recovery. Following...

more
Issue 2/2017 On course for growth

Leipfinger Bader plans multimillion investments in 2017

The family-owned company Leipfinger Bader is looking ahead optimistically in 2017 and has announced multimillion investments. A total of € 8.3 mill. are to be channelled into the three company sites...

more
Issue 4/2016 Leipfinger Bader KG

Ilse Aigner dedicates new tunnel kiln at Leipfinger Bader

Leipfinger Bader brickworks in Vatersdorf has just completed the biggest individual capital investment in the company‘s 150-year history: a brand-new high-performance firing system. This concludes...

more
Issue 06/2010

Leipfinger-Bader Brickworks joined “Pro Passivhaus”

Leipfinger-Bader Brickworks have now joined “Pro Passivhaus”, the German association promoting passive housing.

more